Home Search Browse About Contact FAQ Manuals Custom Venom Shop Privacy Statement Links Articles.
It will only move as far as you had allowed when you loosened the bus driver full patch left screw.
Never use an abrasive cleaning agent or metal brush.
Hvlp TurboForce II Sprayers, exclusive TurboForce Technology.You will hear the second click.Built-in Pressure Gauge The rifle's pressure gauge is located at the end of the lower air reservoir tube.Empty the rifle ' s air pressure completely by dry-firing it in a safe direction.Low and High Power Settings, adjusting the Rear Sight, recommended Lubricants.It is a good idea to set and release the safety several times before cocking the rifle to become familiar with this action.Point the rifle in a safety direction in case the rifle discharges accidentally.It is extremely dangerous to use such jaws pdf editor 2.5 keygen products in this high pressure area.Recommended lubricants Silicone grease (solid in scuba diving stores) or Mineral Oil for the o-rings on the adapter probe.Kariéra, kontaktování spolenosti Graco.Types of pumps used for fire service include: horizontal split case, vertical split case, vertical inline, vertical turbine, and end suction.Use silicone grease (sold in scuba diving stores) to dress the o-rings before each fill.
Carefully insert the adapter probe from the pump hose into the rifle ' s exposed receptor port, taking care not to snag the double o- ring on the edges of the dust cap.
Související odkazy, aL Series Automatic Airless Spray Gun.
Automatické vzduchové stíkací pistole AirPro, stíkací pistole s podporou automatickch funkcí, hvlp a konvenní model.The best technique to operate the pump is to use your upper body weight to push down on the pump, keeping your arms rigid.For example, charged with 3,000.s.i., one built-in pressure gauge might show 19, while another rifle ' s pressure gauge might show 21 with the same 3,000.s.i.To ensure safe operation, you should refill the rifle without the distraction of others nearby, especially children or animals.The pump intake is either connected to the public underground water supply piping, or a static water source (e.g., tank, reservoir, lake).The sprinkler system pressure drops significantly when one or more fire sprinklers are exposed to heat above their design temperature, and opens, releasing water.This allows the trigger to be pulled.Improve transfer efficiency and material usage with this operator-friendly manual.Swab the barrel ' s bore with cloth patches until the last one comes out clean.